Service

• Safety Check (Non E-Bike) $65

• This is our most basic service we offer. We go over the entire bike torquing/tightening all nuts/bolts and adjusting derailleur/s and brakes. With this service we are making sure the bike is in safe operating order. This is usually recommended for newly purchased box store bikes or bikes that have been sitting in storage or have been unused for some time.

• Safety Check (E-Bike)

  $75.00

• This is our most basic service we offer. We go over the entire bike torquing/tightening all nuts/bolts and adjusting derailleur/s and brakes. With this service we are making sure the bike is in safe operating order.

  ** THIS IS A REQUIRED SERVICE FOR ANY THROTTLE/NON THROTTLE AMAZON/INTERNET/ NON NAME BRAND E-BIKE THAT ENTERS THE SHOP FOR ANY REASON** (Batteries must be removed prior to entering the shop! We do not do any type of work on batteries/motors/displays or throttles.)

• Standard-ish Tune Up: $100.00 + Parts

  We have come to despise the term “Standard Tune Up” as there is never a standard bike related issue one bike owner might experience from another.

  Our take on this term includes the following:

• The Bike is wiped down, every component is checked/ adjusted including Brakes/ Derailleur/s and truing of the Wheels. We will inspect the Derailleur hanger for proper alignment and align if out of spec. Brake Pads/ Rotors and the Drivetrain will be inspected for wear and damage.

• Hood Works MTB $400 + Parts

• The Bike is washed and completely disassembled, all cartridge bearing seals are removed & bearings cleaned & re-lubed (bearings will be pulled and replaced if defective) Cranks, Chain, Derailleur/s & Cassette are cleaned in our Ultrasonic Cleaner and Bioremediating Parts Washer then re-lubed installed and adjusted, Fork Lower Leg service & Shock Air Can service is completed with new seals and oil, full Brake bleed, Freehub Body service (cleaned inspected and re-lubed) *on serviceable Freehubs*, Cable & Housing replaced , Wheels trued, Tubeless Sealant replaced. Bike will be finished with a protectant polish to make the bike look its best.

• Hood Works Road/Gravel $275.00 + Parts

• The Bike is washed and completely disassembled, all cartridge bearing seals are removed & bearings cleaned & re-lubed (bearings will be pulled and replaced if defective) Cranks, Chain, Derailleur/s & Cassette are cleaned in our Ultrasonic Cleaner and Bioremediating Parts Washer then re-lubed installed and adjusted, full Brake bleed, Freehub body service (cleaned inspected and re-lubed) *on serviceable Freehubs*, Cable & Housing replaced , Handlebar wrap install, Wheels trued, Tubeless Sealant replaced. Bike will be finished with a protectant polish to make the bike look its best.